Top 5 Things To Do In Case Of Power Failure

A power failure, whether external or internal to your network, always causes discomfort. To limit its duration and inconvenience, if it is a local failure, you can act by respecting the safety instructions (test the circuits, change a fuse, remove a defective appliance…). Or you can contact a professional for a precise diagnosis. So, without further ado, let’s dive into this blog and learn some of the things everyone ought to know about power failure.

Local or general power outage?


In the event of an electrical cut, the first thing to check is to know if the breakdown is local or general. To do this, nothing could be simpler: check your electrical panel to see if your circuit breaker has jumped. If it is in the “off” position, it means that the power cut is limited to your home.

If your circuit breaker has not tripped, the power outage is not limited to your home. It is certainly due to an electrical overload, i.e., the fact that too many electrical appliances are “running” at the same time. However, the cause can also be a short circuit or an insulation fault on your electrical circuit.

In this case, there is only one thing to do: wait for the power to be restored in your neighborhood. Look out your window to see if the street lights are on and the surrounding homes are lit and ask your neighbors if they are in the same situation as you. The dark street is a general power failure if this is the case.

1. Check if it’s a power outage

When the electricity stops working in your home, you should first check to see if the neighbors are affected. Sometimes power outages affect an entire area. When this happens, there is little you can do on your own. At best, you can contact your electricity provider about the problem. They will take care of things for you, and you’ll be able to get the power back on in no time.

2. Turn to the electric meter


The purpose of the circuit breaker is to cut off the flow of electricity to prevent it from causing problems. The goal is to see if any specific circuit breakers have blown, which is usually what happens in the event of an outage. In the event that only your home has the problem, you should turn to your meter. Having multiple breakers for different parts of the house can help make finding the source of the concern easier.

3. The case of overloading

Sometimes a circuit breaker is activated when too many appliances in the house are using electricity. This is often the case in the evening when almost all the lights are on, but also the various appliances. If this is the cause, you are advised to unplug some of these appliances and then turn the electricity back on. Generally, you don’t have to use such devices simultaneously. However, if your electricity needs increase significantly, you may want to let your supplier know.

4. Check for a short circuit


A short circuit is probably the problem that will require the most attention. It can occur for several reasons:

    • A bare wire somewhere in your electrical network
    • A defective electrical device
    • A contact between water and electricity

To determine if this is the case, you need to observe the network in question. If everything seems in good condition, you should turn to the electrical appliances.

5. Call a technician for repair

Sometimes electrical concerns are well beyond your skill set in general. When this is the case, it’s best to call in the services of a technician to get you the help you need. Emergency workers can come to your home at short notice, any time of the day or night. This is a necessity because this kind of problem can be of an urgent nature. You should be prepared to pay extra if you request such a professional after hours.

Looking for help?


For all your electrical needs and retrofitting LEDs services, contact Rushforth Electric. It is an established Toronto company that has been running since 1943 and is one of the leading electrical companies in the greater Toronto area.

They praise themselves for their professionalism and have at heart to help their customers and will be the light at the end of your tunnel. So, why wait? Contact them now and let them help you with all your electrical issues.

You may also like...

2 Responses

  1. 2022-09-12

    […] you need to find a long-lasting solution, you need to hire a qualified person because they always give their best. A qualified electrician will install the best devices […]

  2. 2022-09-12

    […] Tankless water heaters heat water directly without using a storage tank. When a hot water tap is turned on, cold water flows through a pipe to the unit. Either a gas burner or an electric element heats the water. As a result, tankless water heaters provide a constant supply of hot water. In this regard, what are the advantages and disadvantages of a tankless water heater? So, without further ado, let’s dive into this blog and learn some of the things everyone should know about tankless water heaters. […]

Leave a Reply

Your email address will not be published. Required fields are marked *